Name: Siser EasyWeed® MATTE Stretch Heat Transfer Vinyl
Brand: Siser
SKU: 34595927556252
Price: 3.25 USD
Availability: InStock

Flexible Style for Performance Wear and More!

ALL COLORS ARE MATTE!

Activewear has met its match! EasyWeed Stretch by Siser delivers all the benefits of our EasyWeed heat transfer vinyl and combines it with super stretchability to create one remarkable HTV! The thinnest of any Siser material, EasyWeed Stretch has a true matte finish that’s available in over 20 popular colors! While EasyWeed Stretch is ideal for performance apparel from spandex to dri-fit, the soft hand and light weight often make it a favorite for other garments such as: tank tops, onesies, and almost anything else. EasyWeed Stretch can even be cut with laser systems.

EasyWeed Stretch is 85 Microns / 3.35 Mils and is a PU composition.

Sheets are 12"x12" with +/- .25"

Rolls are 12"x5ft with +/- .25" on width and +/- 1" on length

Siser Easyweed Stretch HTV is:

Laser Friendly
Layerable
Iron-On friendly
CPSIA Certified

Siser Easyweed Stretch HTV Applies To:

100% Cotton
100% Polyester
Poly/Cotton Blends
Leather
Lycra/Spandex

Craft Cutter Settings

Cricut:
Blade: Standard Setting: Iron-on

Silhouette Cameo:
Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 4

Brother ScanNCut:
Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1

Pro Cutter Settings

Roland GX/GS-24:
Blade: 45° Gram Force: 60-70 Offset: .250 Speed: 30 cm/s

Graphtec:
Blade: 45° Force: 9-10 Tool: CB09+0 Speed: 30 cm/s

MH, SC2, LP3, and Titan 1:
Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies

Titan 2 & 3:
Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies

Mimaki CG-60SRIII:
Blade: 45° Gram Force: 90 Offset: 30 Speed: 20-30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions

Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 20 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier hot or cold

Heat Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 20 seconds
• Peel carrier hot or cold

Laundering Instructions

Wait 24 hours before first wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Click here for downloadable Siser HTV application instructions

Recommended Accessories

Heat Transfer Cover Sheet

Vinyl

Awesome as usual!

Htv stretchy

I place a big order and within three days I received it. I love love the feel of stretchy vinly. Definitely trying to get all colors in this material. Easy to work with. You won't be disappointed.

Best HTV ever

This HTV is the best, it feels like its part of the fabric, will continue to buy

Easy to work with

Easy to cut, weed and applies seamlessly. Love this in matte black.

Yes yes yes

I am actually going to buy more as soon as I’m done writing this review!

The Best!

This is my go to for htv, cuts and weeds like a dream!! Crafthtv always comes through with their products and service! ❤️

Siser easyweed stretch heat vinyl

Love it easy to work. Makes the shirts look better.

Great Product/Fast service

Great company. Even with the Covid disclaimer I received my product within a week. I needed to make 10 hoodies and didn’t order quite enough on the first order so I was just going to be short a few hoodies but before I could deliver the first batch my other order came in so I was able to deliver the full order. Easy to weed also.

Great

Arrived in less than a week. So far the vinyl is holding up great on the shirts I have made (even with several layers of different colors.) I have found that it is a tad difficult to weed sometimes as it doesnt always cut completely probably based on the design. To resolve this I just cut the image twice on my cricut. Pressing it was a little nerve wracking for me as I'm still very new to working with vinyl. Everyone states you should see the 'grain' of the fabric though the vinyl. I could not so I pressed 2X using the manufacture direction. It still didnt look "the way its supposed to," but I just went with it. I DO NOT follow the washing instructions-honestly I'm too lazy for that....but my shirts are still holding on perfectly!!! (They have been washed probably 10X or more already) used cotton/poly mix shirts, and a t-shirt press.

Amazing stuff

1 2 3

Siser EasyWeed® MATTE Stretch Heat Transfer Vinyl