Electrify Your Look With Unique Finishes
If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you and in a 12" x 5ft roll! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered.
EasyWeed Electric is 90 Microns / 3.5 Mils and is a PU composition.
The roll is 12" x 5ft */- .25" on width and +/- 1" on length
Siser Easyweed Electric HTV is:
- Laser Friendly
- Layerable
- Iron-On friendly
- CPSIA Certified
Siser Easyweed Electric HTV Applies To:
- 100% Cotton
- 100% Polyester
- Poly/Cotton Blends
- Leather
Craft Cutter Settings
Cricut: Blade: Standard Setting: Iron-on
|
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 |
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
|
Pro Cutter Settings
Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
Graphtec: Blade: 45° Force: 8-9 Tool: CB09+0 Speed: 30 cm/s |
MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Mimaki CG-60SRIII: Blade: 45° Gram Force: 90 Offset: 30 Speed: 20-30 cm/s |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions • Set iron dial between Cotton and Linen • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold |
Heat Press Instructions • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
|
Laundering Instructions
- Wait 24 hours before first wash
- Machine wash warm or cold / mild detergent
- Dry on normal dryer setting
- Do not dry clean
Click here for downloadable Siser HTV application instructions
Recommended Accessories
Heat Transfer Cover Sheet