Name: Siser EasyWeed® Electric Heat Transfer Vinyl Roll - 12" x 30ft
Brand: Siser
SKU: 37203552239772
Price: 77.95 USD
Availability: InStock

Electrify Your Look With Unique Finishes

If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you and in a 12" x 30ft roll! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered.

EasyWeed Electric is 90 Microns / 3.5 Mils and is a PU composition.

The roll is 12" x 30ft */- .25" on width and +/- 1" on length

Siser Easyweed Electric HTV is:

Laser Friendly
Layerable
Iron-On friendly
CPSIA Certified

Siser Easyweed Electric HTV Applies To:

100% Cotton
100% Polyester
Poly/Cotton Blends
Leather

Craft Cutter Settings

Cricut:
Blade: Standard Setting: Iron-on

Silhouette Cameo:
Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4

Brother ScanNCut:
Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1

Pro Cutter Settings

Roland GX/GS-24:
Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s

Graphtec:
Blade: 45° Force: 8-9 Tool: CB09+0 Speed: 30 cm/s

MH, SC2, LP3, and Titan 1:
Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies

Titan 2 & 3:
Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies

Mimaki CG-60SRIII:
Blade: 45° Gram Force: 90 Offset: 30 Speed: 20-30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions

Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier hot or cold

Heat Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Laundering Instructions

Wait 24 hours before first wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Click here for downloadable Siser HTV application instructions

Recommended Accessories

Heat Transfer Cover Sheet

Siser EasyWeed® Electric Heat Transfer Vinyl Roll - 12" x 30ft