Skip to content
Orders Over $50 Ship For Free in the US!
Orders Over $50 Ship For Free in the US!
Orders Over $50 Ship For Free in the US!

Fairy Tale Mermaid Scale Pattern Vinyl - 1074

$3.99

Size
Material

Our Mermaid Scale Fairy Tale Pattern Vinyl is printed, produced, and designed by CraftHTV in house and is our line of American made premier adhesive vinyl, heat transfer vinyl (HTV), and Glitter HTV products.

This vinyl product comes in 3 variations; heat transfer vinyl (HTV), heat transfer vinyl with glitter, or adhesive (permanent) vinyl. See details for each below.

NOTE - All roll prints have a 1" trim on the side. We cannot take this away as it is how the printer actually prints the pattern. You still get the amount of vinyl you paid for.

Fairy Tale Adhesive Vinyl Features:

  • Thickness: 4 mil
  • Adhesive: Grey, solvent-based, permanent adhesive
  • Release Liner: PE-coated silicone paper
  • Durability: 5 years
  • Application Min Temp: 46°F
  • Usage: For general signage and other mid-term indoor and outdoor applications.
  • Proudly Made In USA

Application Instructions

  • When installing your graphic, always apply the material using a dry application method; under no circumstances should a wet application be used. Also be careful when using a heat source during installation as this can cause the material to warp and not register during panel installations.
  • Lay the graphic, image-side down, on a flat surface and pull back the liner about 6-12 inches.
  • Sharply crease the liner while holding it away from the adhesive.
  • Align the graphic on the wall and use finger pressure to tack in place.
  • Using a Squeegee, work from the center to the edge, then return to the center and work to the opposite edge.
  • Use overlapping strokes while applying a small portion of the graphic at a time. If your graphic is made up of more than one panel, avoid using horizontal seams when possible.
  • When the entire graphic has been applied to the wall, reapply pressure with the Squeegee around the edges of the graphic multiple times to ensure a good bond.
  • Post heating the graphic edges is recommended between 100 °F - 150°F If the graphic will come into contact with regular cleanings, such as mopping, soil removal, etc., graphics should be sealed in those areas. This is especially important where the graphic is terminated at the floor. Use of a clear silicone sealant along the edges of the graphic is recommended.

Recommended Accessories:

Application Tape
Squeegee

Fairy Tale HTV is:

    • Layerable
    • Iron-On friendly
    • CPSIA Certified
    • Proudly Made In USA

Fairy Tale HTV Applies To:

    • 100% Cotton
    • 100% Polyester
    • Poly/Cotton Blends

Application Instructions For Fairy Tale HTV

Home Iron Instructions
• Cut design in positive (Do not mirror)
• Mask with TTD Mask
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 10 seconds
• Peel carrier cold
Heat Press Instructions
• Cut design in positive (Do not mirror)
• Mask with TTD Mask
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold

Click here for Fairy Tale HTV application instructions
Watch How To Video HERE!


Laundering Instructions

      • Wait 24 hours before first wash
      • Machine wash warm or cold / mild detergent
      • Dry on normal dryer setting
      • Do not dry clean

Recommended Accessories

Heat Transfer Cover Sheet
TTD Masking Material (Carrier Sheet), this is not included with the pattern

Please Note: Due to increased heat and humidity during the summer months, we recommend allowing TTD Masks to return to indoor room temperature (below 70°F/21°C) before use for best performance. If additional cooling is needed, TTD Masks can be placed inside a fridge or freezer for 5- 10 minutes.

Customer Reviews

Based on 16 reviews
100%
(16)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
D.T.
It is so pretty!

I bought this for my daughters mermaid theme room, to do some signs... However I have yet to use it for her room 🤣. Instead I've used it in my craft room! It's very pretty, but take your time weeding, the letters want to pull up and stick to whatever they can (except the backing sheet)! Overall I love it and would order again!!

B
B.T.
Love this

This is such a beautiful vinyl

A
A.L.M.

My go to vinyl to buy cute prints and oh so easy to weed.

L
L.K.
Mermazing

I love this mermaid scale. Easy to use and its perfect for my inner mermaid.

K
K.R.
Great as Expected!!

Awesome!! Beautiful design and received it in 3 days!!!

J
J.
Very pretty

the mermaid fairytale pattern is very pretty. Can't wait to use it.

J
J.C.
Didn’t like it

I never got the Mermaid HTV to work has to throw one shirt away and the second I tried it wouldn’t work so I had to use my other HTV I already had.

n
n.E.
The best stuff for the money!!!

Like I seriously don't shop anywhere else for all of my vinyl.... I've ordered multiple times from Craft HTV and have never been disappointed ♥️♥️
Love love love this!!!

K
K.K.
Mermaid design

Beautiful colors and pretty mermaid design. My niece is going to love this on her cup!

M
M.M.

Love the product...REALLY love the price!